Table of Contents
Advertisement
2.
When the L e v e l
select the RAID set that you want to create.
3.
When the D i s k s
highlight an HDD that you want to belong to the RAID set, then press
the space bar to confirm selection. Repeat the process until the HDDs
are selected.
A selected HDD shows a
4.
Key in the RAID volume capacity. Use the up/down arrow to choose
the block size. The default value indicates the maximum allowed
capacity.
5 - 3 8
5 - 3 8
5 - 3 8
5 - 3 8
5 - 3 8
L e v e l item is highlighted, use the up/down arrow key to
L e v e l
L e v e l
L e v e l
D i s k s
D i s k s
D i s k s item is highlighted, use the up/down arrow key to
D i s k s
sign before it.
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
Advertisement
Table of Contents
