Installing Windows ® 8 / 8 64-Bit / 7 / 7 64-Bit / Vista; Vista Tm 64-Bit With Raid Functions - ASROCK 970 Extreme3 R2.0 User Manual

STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
system. At the beginning of Windows
driver. When prompted, insert the SATA3 driver diskette containing the AMD RAID
driver. After reading the floppy disk, the driver will be presented. Select the driver to
install according to the OS you install.
2.14.2 Installing Windows
TM
Vista 64-bit With RAID Functions
If you want to install Windows
RAID disk composed of 2 or more SATA3 HDDs with RAID functions, please follow
below steps.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the "SATA Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Make a SATA3 Driver Diskette. (Please use an USB floppy or a floppy
disk.)
Make a SATA3 driver diskette by following section 2.14.1 step 2 on page 38.
STEP 4: Install Windows
your system.
®
XP / XP 64-bit OS on your system.
®
setup, press F6 to install a third-party RAID
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
38
®
XP / XP 64-bit OS on your
TM TM
/ Vista 64-bit on a
Storage Configuration.
TM TM
/ Vista 64-bit OS on
TM
/