Power - Acer 721TX - TravelMate - PII 333 MHz Service Manual

Power

The Power Saving screen contains parameters that are related to power-
saving and power management.
The table below describes the parameters in this screen. Settings in boldface
are the default and suggested parameter settings.
Note: If your system has ACPI, all power management functions are
taken care of by Windows 98.
Parameter
LCD backlight
Time-out
Hard Disk Time-
out
Standby Time-
out
S2D Time-out
Resume on LAN
access
Chapter 2
Sets the time-out value before the display enters power
saving mode.
Options: Disabled or time values
Sets the time-out value before the hard disk enters power
saving mode.
Options: Disabled or time values
Sets the time-out value before the computer enters Standby
mode.
Options: Disabled or time values
Sets the time-out value before the computer enters
Hibernation mode.
Options: Disabled or time values
When enabled, the computer resumes operation when
accessed via LAN using a remote computer.
Options: Disabled or Enabled
Description
51