Power Management
Power Management is used to set various settings related to power
management.
This includes the following power-saving-related features:
Item
Enable modem ring
resume on indicator
Enable wake on LAN
Enable battery low
warning beep
Enable sleep upon
battery low
Enable system resume
timer
38
Select to allow the computer to wake up from Standby
mode when an incoming modem ring is detected.
Select to allow the computer to wake up from Standby
mode by a remote computer.
Select to allow the computer to give off warning beeps
when the computer runs low on battery.
Select to allow the computer to enter Standby or
Hibernation mode when the computer runs low on
battery.
Select to set the system resume timer which allows the
computer to wake up from Standby mode if the resume
timer is set and matched.
Click the System Resume Timer button to set it.
Description
System Utilities