Setup Utility; Navigating The Setup Utility - Acer 721TX - TravelMate - PII 333 MHz Service Manual

Setup Utility

The Setup Utility is a hardware configuration program built into your
computer's BIOS (Basic Input/Ouput System).
Your computer is already properly configured and optimized, and you do not
need to run this utility. However, if you encounter configuration problems, you
may need to run Setup. Please also refer to Chapter 6, Troubleshooting when
a problem arises.
To activate the Setup Utility, press F2 during POST (while the TravelMate
logo is being displayed).

Navigating the Setup Utility

There are five menu options: Main, Advanced, Security, Power Saving and
Exit. To navigate the Setup Utility:
6
Press the cursor right/left keys to move between the main menu items.
6
Press Esc while you are in any of the menu options to display the Exit
menu.
6
Press the cursor up/down keys to move between parameters.
6
Press the plus/minus keys (+-) to change the value of a parameter.
Note: You can change the value of a parameter if it is enclosed in
square brackets.
6
Press the Enter key to access a submenu. A > symbol in front of a
parameter denotes an item with a submenu.
Note: Parameter explanations are displayed in the Item-Specific Help
section of the Setup Utility (right panel). Navigation keys are
shown on the bottom of the screen.
Chapter 2 41