Tools; Select Proper Tool; Removing Hose; Attach Wand And Tools - Hoover UH70600 Owner's Manual

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.

select proper tool

(Tools may vary per model)
3.1
A

reMovinG hose

3.2
CAUTION
!
To reduce the risk of personal injury from moving
parts, unplug vacuum before servicing.

how to clean tools

To clean Hose and Air-Powered Hand Tool, wipe
with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water
with a mild detergent. Rinse and air dry 24 hours
before using.

3. tools

b
C
D
3.2 When using cleaning
tools, place cleaner
handle in the upright
position. The agitator
brushroll will not rotate
when the cleaner is in
the upright position.
To remove hose for tool
use, press the hose
release button and pull
hose end out.
To lock back into place,
push hose into hose
tube until you hear a
click.
!
A. Use Upholstery Tool to clean upholstered
furniture, draperies, mattresses, clothing, and
carpeted stairs. (Tool varies per model)
B. Air-Powered Hand Tool may be used for
upholstered furniture, draperies, mattresses,
clothing, automobile interiors, and carpeted stairs.
(Tool varies per model)
C. Extension Wand is used to give extra length to
your hose. Use it with any of the above tools.
D. Crevice Tool may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs and
baseboards.

attach wand and tools

(Tools may vary per model)
3.3
A
b
WARNING
!
Unplug vacuum before connecting Air-
Powered Hand Tool.
8 Actual model may vary from images shown.
3.3 Attach tool or wand
to the hose (A).
Attach tool to wand (B)
by pushing it firmly onto
the wand.
Twist wand or tool
slightly to tighten or
loosen the connection.
To extend wand, twist
counter-clockwise
the unlocked position,
extend wand & twist
clockwise until tight.
Reverse to collapse.
!
to