Using Boot Sequence Selector - Gateway NV42 Series Service Manual

Create the unlock code by inserting the numbers noted in the previous step into the following format:
2.
bios_pw 14452 0
Select 2 to obtain the password. The following passwords can be used for unlocking the BIOS
3.
Password: qjjg9vy
Password: 07yqmjd
Password: cjl14tm
Password: 6mbzjaj
Shut down the computer by pressing down the Power button for 4 seconds.
4.
Turn on the computer and key in the password to unlock the BIOS.
5.
Press 1 or 2 to clean the desired password shown on the screen.
6.

Using Boot Sequence Selector

The Boot Sequence Selector allows the boot order to be changed without accessing the BIOS. To use Boot
Sequence Selector, perform the following steps:
Enter into DOS.
1.
Execute BS.exe to display the usage screen.
2.
38 Chapter 2