Asus MEL-B User Manual page 15

III. HARDWARE SETUP
Motherboard Feature Settings (DIP Switches)
The motherboard's onboard features can be adjusted through the DIP switches. The
white block represents the switch's position. The example below shows all the
switches in the OFF position.
MEL-B DIP Switch
2. VIO Setting (DIP6)
The onboard voltage regulator allows you to select the voltage supplied to the
DRAM, chipset, AGP, and the CPU's I/O buffer.
jumper to Add 0.1 Volt may cause your system to become unstable. It is strongly
recommended that you leave this jumper on its default setting of Normal (3.5V).
Normal Add 0.1Volt
MEL-B Voltage I/O
OFF
ASUS MEL-B User's Manual
ON
<Frequency Selector 1
<Frequency Selector 2
<Frequency Selector 3
<Reserved
<Reserved
<VIO Setting
<Frequency Ratio 1
<Frequency Ratio 2
<Frequency Ratio 3
<Frequency Ratio 4
IMPORTANT! Setting this
15