Main Menu; System Time [Xx:xx:xx]; System Date [Day Xx/Xx/Xxxx]; Sata 1, Sata 2, Sata 3, E-Sata - Asus M4A88T-I DELUXE User Manual

2.3

Main menu

When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information.
Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and
how to navigate through them.
Main Ai Tweaker
Main Settings
System Time
System Date
SATA1
SATA2
SATA3
E-SATA
SATA Configuration
System Information
2.3.1

System Time [xx:xx:xx]

Allows you to set the system time.
2.3.2

System Date [Day xx/xx/xxxx]

Allows you to set the system date.
2.3.3

SATA 1, SATA 2, SATA 3, E-SATA

While entering Setup, the BIOS automatically detects the presence of SATA devices. There
is a separate submenu for each SATA device. Select a device item then press <Enter> to
display the SATA device information.
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor,
Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring).
These values are not user-configurable. These items show Not Detected if no SATA device is
installed in the system.
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting this item to [Auto] enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA mode
disabled. Configuration options: [Disabled] [Auto]
Block (Multi-Sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When this item is set to [Auto], the data
transfer from and to the device occurs multiple sectors at a time if the device supports multi-
sector transfer feature. When this item is set to [Disabled], the data transfer from and to the
device occurs one sector at a time. Configuration options: [Disabled] [Auto]
2-10
M4A88T-I Deluxe BIOS Setup
Advanced
[19:34:30]
[Tue 01/15/2002]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Power Boot Tools
Version 0204
Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+-
Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 2: BIOS information