Memory Configurations - Asus M4A88T-I DELUXE User Manual

1.7.2

Memory configurations

You may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 SO-DIMMs into the
DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
• Due to CPU spec., AMD
• When overclocking, some AMD CPU models may not support DDR3 1600 MHz or
• Due to the memory address limitation on 32-bit Windows
• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
• The default memory operation frequency is dependent on its Serial Presence Detect
• For system stability, use a more efficient memory cooling system to support a full
M4A88T-I Deluxe Motherboard Qualified Vendors Lists (QVL)
DDR3-1333MHz capability
Vendor Part No.
A-Data AD73I1B1672EG
Elpida EBJ21UE8BDS0-DJ-F
G.SKILL F3-10666CL9D-4GBSQ
G.SKILL F3-10666CL9S-2GBSQ
Hynix HMT112S6TFR8C-H9
Hynix HMT125S6TFR8C-H9
Kingston ASU1333D3S9DR8/2G
Kingston ASU1333D3S9DR8G/4G
Asint SSY3128M8-EDJED
Asint SSZ3128M8-EDJED
TEAM TSD32048M1333C9-E
1-12
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
recommend that you obtain memory modules from the same vendor.
ASUS design, this motherboard can support up to DDR3 1333MHz.
higher frequency DIMMs.
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Install a maximum of 3GB system memory if you are using a 32-bit Windows
OS.
- Use a 64-bit Windows
motherboard.
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
memory load (2 SO-DIMMs) or overclocking condition.
SS/ Chip
Size
DS Brand
2GB DS ADATA
2GB DS Elpida
2GB DS G.SKILL
2GB DS G.SKILL
1GB SS Hynix
2GB DS Hynix
2GB DS Kingston
4GB DS Hynix
1GB DS Elpida
2GB DS Elpida
2GB DS Hynix
100 and 200 series CPUs support up to DDR3 1066MHz. With
®
OS if you want to install 4GB or more memory on the
®
Chip NO.
AD3BC8D-13339HPF1012F
J1108BDSE-DJ-F 094909KOW20
D3 128M8GE91002 G72E37
D3 128M8GE91003 H27E84
H5TQ1G83TFRH9C
0
D1288JELDNGD9U
H5TQ2G83AFRH9C
J1108BDBG-DJ-F 1011RR22020
J1108BDBG-DJ-F 10070966E20
H5TQ1G83AFPH9C 919AA
OS, when you install 4GB
®
DIMM socket
support (Optional)
Timing Voltage
A*
- - •
- - •
- - •
- - •
- - •
- - •
- - •
- - •
- - •
- - •
- - •
Chapter 1: Product introduction
®
B*
•
•
•
•
•
•
•
•
•
•
•