Updating The Bios File - Asus M4A87TD/USB3 User Manual

Updating the BIOS file

To update the BIOS file using BIOS Updater
1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2. The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.00b [09/06/22]
FLASH TYPE:
Current ROM
BOARD: M4A87TD
VER: 0206
DATE: 02/09/2010
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3. Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit BIOS menu. See Chaper 3 of
your motherboard user manual for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Chapter 2: BIOS setup
MXIC 25L1605A
M4A89GTD.ROM 2097152 2010-01-11 17:30:48
[Tab] Switch
[B] Backup
Yes No
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[V] Drive Info
[Esc] Exit
2-7