Pair Devices - Nokia E63 User Manual

The Sent folder in the Messaging application does not store
messages sent using Bluetooth connectivity.
To receive data using Bluetooth, select
My phone's visibility
>
a non-paired device or Hidden
device only. When you receive data through Bluetooth,
depending on the settings of an active profile, a tone sounds,
and you are asked if you want to accept the message in which
the data is included. If you accept, the message is placed in
the Inbox folder in the Messaging application.
Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
A Bluetooth connection is disconnected automatically after
sending or receiving data. Only Nokia PC Suite and some
enhancements such as headsets may maintain a connection
even if not actively used.

Pair devices

Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits)
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect the
devices for the first time. After pairing, it is possible to
authorize the connection. Pairing and authorizing the
connection makes connecting quicker and easier, as you do
© 2008-2009 Nokia. All rights reserved.
Bluetooth
Shown to all to receive data from
to receive data from a paired
not have to accept the connection between paired devices
every time you establish a connection.
The passcode for remote SIM access must have 16 digits.
On and
>
1. Select Options
to search for Bluetooth devices within range. If you have
sent data using Bluetooth before, a list of the previous
search results is displayed. To search for more Bluetooth
devices, select
2. Select the device with which you want to pair and enter
the passcode. The same passcode must be entered to the
other device as well.
3. Select Yes
and the other device automatic, or
connection manually every time a connection attempt is
made. After pairing, the device is saved to the paired
devices page.
To give a nickname to the paired device, select
Assign short
device.
To delete a pairing, select the device whose pairing you want
to delete and
Options
>
device and cancel the pairing with that device, pairing is
removed immediately and the connection is ended.
To allow a paired device to connect automatically to your
device, select
device and the other device can be made without your
knowledge. No separate acceptance or authorization is
needed. Use this status for your own devices, such as your
New paired device. The device starts
>
More devices.
to make the connection between your device
name. The nickname is only displayed in your
Options > Delete. To delete all pairings, select
Delete all. If you are currently connected to a
Set as authorized. Connections between your
Connectivity
No to confirm the
Options
>
105