Table of Contents
Advertisement
90
Learning the Basics
Using the DVD-ROM or multi-function drive
2
Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3
Gently push the tray in to close it.
Removing a disc with the computer off
1
Insert a slender object, such as a straightened paper clip,
into the manual eject hole.
The disc tray slides partially out of the drive (about 1
inch).
2
Gently pull the tray out until it is fully open, remove the
disc, and place it in its protective cover.
3
Gently push the tray in to close it.
Caring for CD or DVD Discs
Store your discs in their original containers to protect
them from scratches and keep them clean.
Do not bend a disc or place heavy objects on top of it.
Do not apply a label to or otherwise mar the surface of a
disc.
Hold a disc by its outside edge. Fingerprints on the
surface can prevent the DVD-ROM drive or multi-
function drive from reading the data properly.
Do not expose discs to direct sunlight or extreme heat or
cold.
To clean a disc that is dirty, wipe it with a clean, dry
cloth. The most efficient method to clean it is to start
from the center of the disc and wipe toward the outward
edge (not in a circle). If necessary, moisten the cloth with
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Advertisement
Table of Contents
