Table of Contents
Advertisement
7
Gently press the disc onto the center spindle until you
feel it click into place.
8
Make sure the disc is completely on the spindle and is
lying flat on the tray.
9
Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing a disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
1
Press the eject button on the drive.
The disc tray slides partially out of the drive (about 1
inch).
Using the DVD-ROM or multi-function drive
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Do not touch the surface of the disc. Do
not stack discs. If you incorrectly handle the discs, you could
lose data.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact Toshiba support for assistance.
Do not press the eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
Learning the Basics
89
Advertisement
Table of Contents
