Table of Contents
Advertisement
56
Getting Started
Adding memory
9
Remove the new memory module from its antistatic
packaging.
10
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
11
Gently press down on the memory module connector
until the clips snap into place.
Do not force the memory module into position. The
memory module should be level when secured in place.
Sample inserting the memory module into the slot
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
Advertisement
Table of Contents
