Brother P-touch PT-9600 User Manual page 81

When the last label is printed, press
the chain of labels and cut it.
When setting 1, 2, 3 or 4 is selected, the Auto
Cut indicator in the upper-right corner of the
display comes on, indicating that the labels will
be cut off after the last label in the chain is
printed.
1 2 3 4 5 6 7 8 9
R
R
G
<<< P-touch >>>
R
N O
H
R
L M
R
I
1:_
R
J
AUTO 1.10
Length Margin
NOTE
☞
AV labels are always cut after they are printed
regardless of the current Auto Cut setting.
☞
When setting 5, 6, 7 or 8 is selected, the Auto
Cut indicator does not come on.
The following Auto Cut settings are available:
to feed
f
K Q Q Q Q Q
A B C D E F
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
1
(both full and half cuts—
no chain printing)
2
(full cuts only—no half
cuts and no chain print-
ing)
3
(half cuts only—no full
cuts and no chain print-
ing)
4
(no full, half cuts or chain
printing)
5
(full, half cuts and chain
printing)
6
(full cuts and chain print-
ing—no half cuts)
7
(half cuts and chain print-
ing—no full cuts)
8
(chain printing—neither
full nor half cuts)
NOTE
☞
After printing a label on TZ tape with the Auto
Cut function set to 5, 6, 7 or 8, press f to feed
the tape, then cut it.
☞
This function can also be specified with the
P-touch Editor 3.2 software.
To change the setting for the Auto Cut
function:
1 Hold down d and press f.
1 2 3 4 5 6 7 8 9 A B C D E F K Q Q Q Q Q
R
R
G
R
N O
H
R
A. CUT
L
R
I M
1
R
J
1.3 1.10
Length Margin
2 Press m or g until the desired setting is
displayed. The current setting is shown on
the left side of the display and a sample can
be seen on the right side.
NOTE
☞
To return the function to its default setting (1),
press the space bar.
☞
To return to the text without changing the set-
ting for the Auto Cut function, press
d
hold down and press
3 Press n to apply the setting.
Print key (p)
After you have typed in your text and chosen all
of the desired format settings, you are ready to
print it.
NOTE
Depending on the setting selected for the Auto Cut
function, TZ labels will automatically be cut after
they are printed. AV labels are always cut after they
are printed.
To print a label:
Press p. The message "COPIES" followed
●
by the number of the label being printed
appears.
Ch. 3 Functions
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
e
(OR
f
).
69