Table of Contents
Advertisement
OK
OK
6
PRECAUTIONS
• The equipment must be connected to a grounded main
outlet.
Failure to do this may result in an electric shock.
• Handle the power cord with care.
* Do not place the cord underneath the LCD monitor or other
heavy objects.
* Do not pull on the cord.
* Do not bend, bundle or tie up the cord.
* Never attempt to repair a damaged cord.
If the power cord becomes damaged, stop using it. Use of a
damaged cord may result in fire or electric shock.
• To disconnect the power cord, grasp the plug firmly and
pull.
Never tug on the cord, doing so may cause damage and could
result in fire or electric shock.
• Use the correct voltage.
The LCD monitor is designed for use with a specific voltage only.
Connection to a different voltage may cause fire, electric shock,
or other damage.
• Do not overload your power circuit, as this may result in
fire or electric shock.
• To ensure proper connections of the power cord, be
certain to plug the power cord into the provided LCD
monitor connector and directly to a wall outlet.
By not doing so may result in fire or electric shock.
• Keep the plastic packing bags away from children and
infants.
Plastic bags can be dangerous. To avoid danger of suffocation,
keep the bag away from babies and children.
• Place the LCD monitor on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in
injury or equipment damage.
If the LCD monitor falls, disconnect the power immediately and
have the unit checked by a qualified service engineer before using
it again. Using a LCD monitor after it has been dropped may
result in fire or electric shock.
• When attaching the monitor to the mount, use the
enclosed screws and tighten them securely. When
reattaching the monitor to the tilt stand, use the screws
that was attached to the monitor originally.
By not doing so may result in injury or failure of the monitor. To
attach the mount to the monitor, please read the instruction
manual of the mount.
Advertisement
Table of Contents
