Maintenance Tab - Oki ML8810n Manual Do Utilizador

Maintenance Tab

Location
Service Use TCPIP
Protocol
Use NetBEUI
Protocol
Use FTP
Service
Use TELNET
Service
Use Web
Service
Use SNMP
Service
Use STMP
Service
IP Filter Use IP Filter
Setup...
Admin IP
Address
IP Filter
Range 1 – 10
Comments
Set TCPIP Protocol, enabled or disabled.
Set NetBEUI Protocol, enabled or disabled.
Set FTP service, enabled or disabled.
Set TELNET service, enabled or disabled. (Not
supported.)
Set Web service, enabled or disabled.
Set Web service, enabled or disabled.
Set Web service, enabled or disabled.
Set IP filtering, enabled or disabled.
Set one IP address excluding this filtering functionality.
Select the 10 IP address ranges (Range 1 has the
lowest priority and Range 10 has the highest priority).
For each range,
Start Address
End Address
Printing
Configuration
OkiLAN 7120e Network User's Guide
Set the starting and end addresses.
Select when printing access is
permitted from the range.
Select when configuration access is
permitted from the range.
20