Media Insertion Guide - HP A6110n - Pavilion - 2 GB RAM Getting Started Manual

Media Insertion Guide

62
Getting Started
1 Insert the media into the card slot until it stops.
The activity light (A) on the memory card reader lights, and the computer
automatically detects the media.
You must insert media correctly. Note the direction of the notched corner
NOTE:
on the media. For more information, see "Media Insertion Guide."
CompactFlash and Microdrive are keyed and cannot be inserted incorrectly.
Insert the receptacle edge (holes) of this media into the slot.
2 An Autoplay window opens. Select a program to access your files. The computer
opens a program so you can access the media contents. You can copy files from or to
the media.
Or
If the Autoplay window does not open, click Windows Start Button on the task
bar, click Computer, and then double-click the Memory Card icon to display the
files on the memory card.
3 When you are finished, right-click the drive icon, click Eject, check that the activity
light is on but not blinking, and then remove the media. A steady activity light
indicates that the computer is not reading or writing the media card.
CAUTION: Do not try to remove media when the activity light is blinking. Doing
so may cause loss of data.
4-slot memory card reader (select models only)
A Activity light
B Upper-left slot
C Lower-left slot
D Upper-right slot
E Lower-right slot