Using The Stereo Earphones; Using The Controls - Yamaha Silent Guitar SLG110S Owner's Manual

■. Using.the.stereo.earphones.
When using the instrument with the supplied stereo earphones or a separately purchased pair of
headphones, or when you want to send the instrument's stereo output to an external device, use
the headphones (PHONES) jack for connecting the earphones or external device.
1.
Set the headphones ON/OFF switch, located on the right side of the control panel, to its "ON" position
to supply power to the Silent Guitar. The power lamp will light.
•. When.using.the.LINE.OUT.jack,.audio.output.is.delivered.to.the.headphones.jack.regardless.of.the.
headphones.ON/OFF.switch.position.
2.
Insert the earphone plug into the headphone jack. When connecting the instrument to an external de-
vice, connect the external device to the PHONES jack using a cable with a stereo plug.
3.
The remaining procedures are the same as described above in the "Using the LINE OUT jack" sec-
tion's steps 2 through 4.
•. When. using. a. pair. of. headphones,. do. not. operate. at. high. volume. levels. for. long. periods. of. time..
Doing.so.can.lead.to.irreparable.damage.to.your.hearing.
•. Do.not.disconnect.or.connect.the.plug.when.the.headphones.are.placed.over.your.ears.
(or.stereo.output.to.an.external.device)

Using the Controls

13