Gigabyte GA-8N-SLI Configuration Manual page 10

Sata configurations p4 nforce4 sli series

Hide thumbs Also See for GA-8N-SLI:

Step 4:

Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 14 below will appear

Step 5:

Insert an empty floppy disk and select the nVIDIA Serial ATA driver by pressing the corresponding letter

from the menu (for example, from the menu in Figure 14, press G to select nVIDIA C19 Series Raid

(XP) if you wish to install Windows XP or press H to select nVIDIA C19 Series Raid (2K) if you wish

to install Windows 2000). Then it will take about one minute to copy the SATA driver from the

motherboard driver CD to the floppy disk.

Step 6:

Press 0 to exit when the procedure is complete.

(Note): The name of the drivers in the menu might differ, depending on the version of your

driver CD-ROM disk.

SATA Configurations (P4 nForce4 SLI series) - 10 -

Figure 14

(Note)

Table of Contents