Exit Discarding Changes; Load Default Settings - Gigabyte GA-8IPXDR-E Series User Manual

Exit Saving Changes
This option allows user to exit system setup with saving the changes.
Press <Enter> on this item to ask for the following confirmation message:
Pressing 'Y' to store all the present setting values tha user made in this time into CMOS.
Therefore, whenyou boot up your computer next time, the BIOS will
re-configure your system according data in CMOS.

Exit Discarding Changes

This option allows user to exit system setup without changing any
previous settings values in CMOS. The previous selection remain in effect.
This will exit the Setup Utility and restart your compuetr when selecting this option.
Press <Enter> on this item to ask for confirmation message.

Load Default Settings

Press <Enter> on this item to load the default values for all the setup options. Enable this
function you will get a confirmation dialog box with a message as below:
Press [Enter] to continue
Or press [ESC] to Abort
Press [Enter] to load the default settings that are factory settings for default performance
system operations.
Load Original Values
Press <Enter> on this item to discard changes without exiting setup. Enable this function you
will get a confirmation dialog box with a message as below:
Press [Enter] to continue
Or press [ESC] to Abort
Press [Enter] to load the original values that are factory settings for factory original value
system operations.
5 9
BIOS Setup