Table of Contents
Advertisement
Step 3:
After entering the Create Volume Menu screen, name the disk array with 1~16 letters (letters cannot be
special characters) under the Name item. When finished, press ENTER to select a RAID level (Figure
6). There are four RAID levels: RAID0, RAID1, RAID10 and RAID5. Select a RAID level and press
ENTER.
[
]-Change
Step 4:
Set the stripe block size (Figure 7). The KB is the standard unit of stripe block size. The stripe block size
can be set from 4KB to 128KB. After the setting, press ENTER to set array capacity.
[
]-Change
SATA Hard Drives Configurations (Intel ICH7R)
Intel(R) Matrix Storage Manager option ROM V5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Choose the RAID level best suited to your usage model.
RAID0-
Data striped across multiple physical drives for performance.
RAID1-
Data mirrored across multiple physical drives for redundancy.
RAID10- Striped volume whose segments are RAID1 volumes. Requires
four hard drives. Functionally equivalent to RAID0+1.
RAID5-
Data and parity striped across three or more physical drives
for performance and redundancy.
[TAB]-Next
Intel(R) Matrix Storage Manager option ROM V5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
The following are typical values:
[TAB]-Next
RAID_Volume0
RAID0(Stripe)
Select Disks
128KB
223.6 GB
Create Volume
[ HELP ]
[ESC]-Previous Menu
Figure 6
RAID_Volume0
RAID0(Stripe)
Select Disks
128KB
223.6 GB
Create Volume
[ HELP ]
RAID0 -
128KB
RAID10 -
64KB
RAID5 -
64KB
[ESC]-Previous Menu
Figure 7
- 6 -
[ENTER]-Select
[ENTER]-Select
Advertisement
Table of Contents
