Yamaha DTX400K Reference page 6

Transferring Song Files
Transferring files from drum module to computer
NOTE
• The menu items and windows shown below may differ slightly depending on your version of Windows.
• The songs that come pre-installed on your drum module (i.e., preset songs) cannot be transferred to a computer.
1.
Connect your drum module and computer, and set up your drum module as follows:
• Select either Kit Mode or Song Mode.
• Ensure that song or metronome playback has been stopped.
2.
Double-click the Musicsoft Downloader shortcut on your desktop.
If there is no Musicsoft Downloader shortcut on your desktop, open the Start menu, navigate to All Programs  YAMAHA 
Musicsoft Downloader 5, and click Musicsoft Downloader.
3.
Click the Connection Check button at the bottom of the main window to confirm the current connec-
tion status.
An error message will be displayed if your drum module and computer are not connected or are unable to communicate properly. In
such a case, check your connections and/or MIDI driver according to the error message.
4.
Click Electronic Musical Instruments at the left of the main window.
4
5
The [KIT], [SONG], and [TRAINING] buttons on your drum module will all light up.
6 DTX400K/DTX430K/DTX450K MIDI Reference
6
Select files and then
click Move.
3