Yamaha Clavinova CVP-609 Reference Manual page 82

Mode Rec Stop
Punch In/ Punch In At
Out
Punch Out At
Pedal Control
3
Select a MIDI Song to be re-recorded.
4
Press the [ ](REC) button to call up the Song Recording display.
If the Channel area is not shown, touch [ ] at the left of "Channel. "
5
Turn on the channel to be re-recorded.
NOTE
For details about the recording channels, refer to the Owner's Manual.
6
Press the SONG CONTROL [ / ] (PLAY/PAUSE) button to start recording.
At the Punch In point specified in step 2, play the keyboard to start actual recording. At the Punch Out point
specified in step 2, stop playing the keyboard.
7
Touch (Save) which appears in the Song area of the Home display to save the recorded
Song.
NOTICE
The recorded Song data will be lost if you select another Song or turn the power to the instrument off without
executing the Save operation.
CVP-609/605 Reference Manual
Determines the Punch Out timing.
• Replace All: This deletes all data after the point at which recording is
stopped.
• Punch Out: The Song position at which recording is stopped is regarded as
the Punch Out point. This setting maintains all data after the point at which
recording is stopped.
• Punch Out At: Actual overwrite recording continues until the beginning of
the "Punch Out" measure specified in the Punch In/Out parameter below, at
which point recording stops and normal playback continues. This setting
maintains all data after the point at which recording is stopped.
Specifies the Punch In measure.
Specifies the Punch Out measure.
When this is set to "On, " you can use the center pedal to control the Punch
In and Punch Out points. While a Song is playing back, pressing (and
holding) the center pedal instantly enables Punch In recording, while
releasing the pedal stops recording (Punch Out). You can press and release
the center pedal as often as you want during playback. Note that the current
function assignment of the center pedal is cancelled when the Pedal Punch
In/Out function is set to "On. "
NOTE
Pedal Punch In/Out operation may be reversed depending on the particular
pedal you've connected to the instrument. If necessary, change the pedal
polarity to reverse the control
Song Settings Related to Playback/Recording
(page 37).
82