Assigning A Specific Function To Each Pedal Or Assignable Button - Yamaha Clavinova CVP-609 Reference Manual

Assigning a Specific Function to Each
Pedal or ASSIGNABLE button
Pedal
To the three pedals of this instrument, you can assign one of various functions instead of the original functions (damper,
sostenuto and soft). To the Footswitch or Foot Controller connected to the [AUX PEDAL] jack, likewise, you can assign
one of various functions.
1
Select the function for each pedal.
For information about each function, refer to pages
NOTE
You can also assign the other functions to the pedal — Punch In/Out of Song
34). If you assign multiple functions to the pedal, the priority is: Punch In/Out of Song  Registration Sequence 
(page
Functions assigned here.
2
Touch (Setting), then make the detailed settings of the selected functions.
For each Part, you can turn on or off the selected function and adjust the degree to which the selected function is
applied. Depending on the function selected in Step 1, the available parameters differ, or
indicating that there is no available parameters.
3
If necessary, set the polarity of the footswitch or foot controller connected to the [AUX
PEDAL] jack.
Depending on the Footswitch or Foot Controller, it may work in the opposite way (i.e., pressing it has no effect, but
releasing it does). If such a case occurs, use this setting to reverse the polarity.
4
If you change the functions of the Center and Left pedals from the default settings, turn
"Depend On Main Voice(Center & Left)" on or off as desired.
When this is set to off, the function assignments of the Center and Left pedals are maintained even if the Main Voice
is changed (page 44).
CVP-609/605 Reference Manual
1 2
38 - 39.
(page
3
4
81) and Registration Sequence
(Setting) is gray out
37