Yamaha Clavinova CVP-609 Reference Manual page 25

Editing the Vocal Harmony Type (CVP-609)
By editing the parameters of the preset Vocal Harmony type, you can create your original Vocal Harmony type.
1
Touch the Vocal Harmony name to call up the Vocal Harmony Selection display.
2
Select the desired Vocal Harmony type.
3
Based on the settings of the selected Vocal Harmony type, edit them as desired.
When the Mode ( ) is set to "Chordal":
 Harmony
Lets you edit the Vocal Harmony parameters.
Harmony
On/Off
Mode
CVP-609/605 Reference Manual
Turns Vocal Harmony on or off.
Although one of the three following Modes is automatically selected when a Vocal
Harmony type is selected, you can change the Mode.
The harmony notes are determined by the following three chord
Chordal
types: chords played in the chord section of the keyboard (with
[ACMP ON/OFF] turned on), chords played in the left hand
section of the keyboard (with the Left part turned on), and chords
contained in Song data for controlling the harmony. (Not available
if the Song does not contain any chord data.)
NOTE
Vocoder The microphone sound is output via the notes you play on the
keyboard or via the Song playback notes.
Vocoder-Mono Basically the same as the Vocoder. In this mode, only single-note
melodies or lines can be played back (with last-note priority).
When the Mode ( ) is set to "Vocoder" or "Vocoder-Mono":
If you want to apply the Vocal Harmony by pressing the chords in
the chord section when the Style is stopped, you need to set the
"Stop ACMP" parameter to a setting other than "Disabled" in the
Style Setting display (page 76).
Vocal Harmony Settings
25