Yamaha Clavinova CVP-609 Reference Manual page 23

Pitch Detect Lets you set how the pitch of the microphone sound during performance is detected.
(Only when
Vocal Type
"Vocal" is
selected)
(only for CVP-
609)
Speed
Background
Noise Cut
Talk Mixing Lets you make settings for talking or making announcements between songs during a performance.
(Only when
Pan
"Talk" is
selected)
Reverb Depth
Chorus Depth
Attenuator
NOTICE
The settings here are lost if you turn off the power without executing the Save operation.
Storing the Microphone Settings
You can store the microphone settings together with the Vocal Harmony settings by touching
one of 10 User Memories. For ease in future recall, you should assign a sufficiently descriptive name or one that matches
your performance.
To call up the microphone settings, touch the setting name at left of
NOTE
If you want to save the microphone settings to the USB flash memory, save as a User Effect file. To do this, on the display called
up via [Menu]  [Utility]  [Factory Reset/Backup]  page 2/2, touch [Backup] of "User Effect" to execute the Save operation
(page 96).
CVP-609/605 Reference Manual
Set this to obtain the most natural vocal harmony, depending on your voice.
• Low: Setting for lower voices. This setting is also appropriate for growling
and shouting.
• Mid: Setting for mid-range voices.
• High: Setting for higher voices. This setting is also appropriate for singing
close to the microphone.
• Full: Setting for vocalists having a wide range, from low to high.
Adjusts the response speed of the Vocal Harmony effect, or how quickly
harmonies are generated in response to your voice. The larger the number,
the faster the response.
NOTE
When one or both of LEAD PITCH DETECT SPEED and HARM. PITCH
DETECT SPEED of Vocal Harmony
this parameter is effective. In other settings, the setting of the Vocal
Harmony's Pitch Detect Speed is effective.
This allows you to filter out noises that would interfere with the pitch
detection. A setting of "Thru" turns the noise filter off.
Determines the stereo pan position of the microphone sound.
Determines the depth of the reverb effects applied to the microphone sound.
Determines the depth of the chorus effects applied to the microphone sound.
Determines the amount of reduction to be applied to the overall sound
(excepting the microphone input) — allowing you to effectively adjust the
balance between your voice and the overall instrument sound.
(page 27) are set to "as MIC SETTING,"
(Save) then selecting
(Save) then select the desired file.
Microphone Settings
23