GE JKP70BMBB Installation Instructions Manual page 10

Installation Instructions
Cutout for 30"
A
For JTP35, JTP55, JTP75, PT956, PT960, ZET958 models only.
28 1/2" (72.4 cm)
28 5/8" (72.7 cm)
ALLOW 11/16"
FOR OVERLAP
Allow 11/16"
OF THE OVEN
(1.75 cm) for
OVER SIDE EDGES
overlap of oven
OF CUTOUT
Opening
over side edges
Between
of cutout
Inside Walls
Must Be At
BETWEEN INSIDE
Allow a minimum
Least 28 1/2"
ALLOW A MINIMUM OF 21"
of 21" (53.3 cm) for
(72.4 cm) Wide
FOR CLEARANCE TO
clearance to adjacent
ADJACENT CORNERS,
corners, drawers,
DRAWERS, WALLS ETC. Allow 1" (2.5 cm)
walls, etc. when
WHEN THE DOOR
door is open
IS OPENED. overlap of oven
ALLOW 1" FOR
(3.2 cm) overlap
ON OVEN TOP
of oven bottom
AND BOTTOM
21" (53.3 cm)
21"
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For
double ovens, the runners and braces
must support 275 lbs (124 Kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
(76.2 cm)
Cutout
Width
CUTOUT
WIDTH
28 1/2" MIN.
Min.
28 5/8" MAX.
Max.
THE OPENING
WALLS MUST
BE AT LEAST
Cutout
28 1/2"WIDE
Height
CUTOUT
51 13/16" (131.6 cm)
HEIGHT
Min.
minimum for
51 13/16" MIN.
51 15/16" (131.9 cm)
51 15/16" MAX.
top and 1 1 ⁄
" Max.
4
OVERLAP
OF CUTOUT of cutout
Recommended
RECOMMENDED
CUTOUT LOCATION
cutout location
30"
30"
12" FROM THE FLOOR
from floor 12" (30.5 cm)
(76.2 cm)
CABINET
Cabinet WIDTH
Width
Double Built-In Ovens only
7 3/4"
Cabinet Width
Junction Box
(19.7 cm)
Location
Max.
5"
Recommended
(junction box
may be
Cutout Location
located in
from Floor
adjacent
JUNCTION BOX
cabinet)
LOCATION
Cutout Depth
Cutout Width
Cutout Height
47" (119.4 cm)
47" TO
Min.
BOTTOM OF
JUNCTION BOX
to Bottom of
Junction Box
Suitable
Bracing
to Support
Runners
10
30" (76.2 cm)
12" (30.5 cm)
23 1/2" (59.7 cm) Min.
28 1/2" (72.4 cm) Min.
28 5/8" (72.7 cm) Max.
51 13/16" (131.6 cm) Min.
51 15/16" (131.9 cm) Max.
NOTE: If the cabinet does not
have a front frame and the sides
are less than 3/4" (1.9 cm) thick,
shim both sides equally to
establish the cutout width.
C L
21 5/8"
21 5/8"
OVER CENTERLINE
(54.9 cm) Over
OF CABINET
Centerline
of Cabinet
2" x 4"
2" x 4" or
EQUIVALENT
(5 cm x 10 cm)
RUNNERS
or equivalent
runners level
with bottom
of cutout