Making A Sata Driver Disk; Figure; Sata Hard Drives Configurations (Intel Ich6R) - Gigabyte GA-8I915P Dual Graphic Manual

(4) Making a SATA Driver Disk

To install Windows 2000/XP onto a SATA hard drives on the ICH6R controller successfully, you need
to install required driver for the SATA controller during OS installation. Without the driver, the hard drives
may not be recognized during the Windows setup process.
First of all, you need to copy the driver for the SATA controller from the motherboard driver CD to a
floppy disk. The instructions below explain how to copy the driver.
Step 1: Find an available system and insert the motherboard driver CD into the CD-ROM drive. The
installation utility will appear automatically. Quit the installation utility first.
Step 2: Go to My Computer and right-click the CD-ROM drive icon and select Open (Figure 11).

Figure 11

Step 3: Go to the BootDrv folder and look for an executable program named MENU.exe (Figure 12).
Figure 12

SATA Hard Drives Configurations (Intel ICH6R)

- 9 -