Figure - Gigabyte GA-8I915P Dual Graphic Manual

Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 20 below
will appear. Use the ARROW keys to select Intel(R) 82801FR SATA RAID Controller* and press
ENTER. Then it will begin to load the SATA driver from the floppy disk.
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.
Step 4:
When the screen as shown below appears, press ENTER to continue the SATA driver installation from
the floppy disk. The driver installation will be finished in about one minute.
"*" If your southbridge is ICH6R, select Intel(R) 82801FR (ICH6R).
If your southbridge is ICH5R, select Intel(R) 82801ER (ICH5R).

Figure 17

Figure 18
- 12 - SATA Hard Drives Configurations (Intel ICH6R)