Gigabyte GA-8GPNXP Duo User Manual page 21

GigaRAID (IT8212) ATA RAID Controller USER'S MANUAL
Setup Array for JBOD:
The GigaRAID (IT8212) ATA RAID Controller allows you to use two, three or four
hard drives to form a JBOD (Just a Bunch Of Disks) array as array 0. Although JBOD
doesn't offer other RAID functionality, it makes the hard disks appear to be a single
one by combining the drives into one larger logical one without any capacity loss.
Setup Array for Normal:
You can use the GigaRAID (IT8212) ATA RAID Controller as a normal IDE controller.
The GigaRAID (IT8212) ATA RAID Controller allows you to use one, two, three or four
hard drives. All the hard drives attached on the GigaRAID (IT8212) ATA RAID
Controller are left to act as independent drive volumes.
21