Setup Utility; Using The Gigaraid (It8212) Ata Raid Controller Setup Utility - Gigabyte GA-8GPNXP Duo User Manual

GigaRAID (IT8212) ATA RAID Controller USER'S MANUAL

Setup Utility

Using the GigaRAID (IT8212) ATA RAID Controller Setup
Utility
The GigaRAID (IT8212) ATA RAID Controller Setup Utility provides functions to
create, delete and rebuild an array. It also provides the information of each hard drive
and the configuration of the GigaRAID (IT8212) ATA RAID Controller. Please attach
your hard drives to the GigaRAID (IT8212) ATA RAID Controller and boot your
system. If your array's configuration is correct, you will see the following message
shown by the GigaRAID (IT8212) ATA RAID Controller onboard BIOS on the screen.
You can press "Ctrl-G" keys to enter Setup Utility or press the "Esc" key to skip and
boot directly.
If your array's configuration is incorrect, you will see an error message on your
screen. You have to enter Setup Utility to reconfigure the arrays then quit utility to
boot.
15