Table of Contents
Advertisement
GigaRAID (IT8212) ATA RAID Controller USER'S MANUAL
Setup Array for RAID 1:
The GigaRAID (IT8212) ATA RAID Controller allows two drives to be setup as a RAID
1 (mirror) array or four drives as two arrays. The first mirrored array will be set as
array 0 and the second as array 1. RAID 1 is implemented as mirroring; a drive has
its data duplicated on the other different drive. Selecting RAID 1 can enhance read
performance and allow fault tolerance. RAID 1 array can thoroughly backup your files
to prevent data loss.
Note: Two hard drives that form a RAID 1 array have to be attached as the same
master or slave hard disks.
RAID 1
Primary/Master
Primary/Slave
Secondary/Master
Secondary/Slave
19
Advertisement
Table of Contents
