Eizo eClient 620L User Manual page 52

Using the 620L as a FTP server
The firmware file can be updated by the 620L set as a FTP server when two or more
620L exists on the same network
NOTE
• This updating is available for OS file (NK.bin) only.
620L (FTP Server)
1.
Update a 620L firmware.
Refer to the previous section for the updating procedure.
2.
Set the FTP Server setting of the 620L updated on Step 1.
(Refer to page 45 for the FTP service settings.)
3.
Update the other 620L.
Specify the 620L for FTP server in the [Settings] (Refer to below).
[Server:] .............................Type IP address or full domain name of the 620L.
[User Name:]/[Password:] ...Type the user name and password to connect the FTP.
[File Name:] ........................Type the NK.bin
52
7. SOFTWARE UPDATING/INSTALLATION
Update
Update
620L
FTP Server
620L