10. How to Use the PJ Controller
SYSTEM Adjustment
On this screen, you can select the color system and scan mode for the video signal. This
screen is displayed only when Video (Video/Component) is selected for the input source of the
projector. Depending on the signal, the screen is varied as follows.
Component Input
VIDEO/S-VIDEO Input
NOTE: Items in System Adjustment are displayed only for video input (video/Component).
82
Parameter
System Adjustment ..........Select a scan mode of
AUTO ................................Automatically adjust to the
Parameter
Color System Adjustment
......................Select a color system of
AUTO ................................Automatically adjust to the
Description
component signal.
scan mode of the input signal.
Description
Video/S-Video signal.
color system of the input
signal.