Network Specifications Of The Projector - Eiki WL-30(XG-705A) Owner's Manual

Network set-up and operation
Table of Contents

Advertisement

Network Specifications of the Projector

LAN Terminal
Data communication speed
Protocol
USB Wireless LAN Adapter (Optionally available. Model : WL-30)
Interface
Communication Mode
Data Transfer Speed
Wireless Frequency (Channel)
Modulation Form
Protocol
Security
Service area
Operating Voltage
Environmental conditions
Compliance
Countries and Standards
Operating Environment and Configuration
100Base-TX (100Mbps)/10Base-T (10Mbps)
TCP/IP
Correspond to IEEE802.11b/g, USB 2.0/1.1
AdHoc,
Infrastructure
1/2/5.5/11Mbps (IEEE802.11b)
6/9/12/18/24/36/48/54Mbps (IEEE802.11g)
When using AdHoc mode, only IEEE802.11b is
usable.
2412MHz–2462MHz (CH1–CH11)
IEEE802.11g OFDM
54/4Mbps 64QAM, 36/24Mbps 16QAM, 18/12Mbps
QRSK, 9/6Mbps BPSK
IEEE802.11b DSSS1
11/5Mbps CCK, 2Mbps DQPSK, 1Mbps DBPSK
TCP/IP
WEP 64 Bit/WEP 128Bit/WEP 152Bit, SSID, ESSID, LEAP
about 30 m (without disturbance)
Differs according to the operating environment.
DC 5V
Operating temperature: 5–35˚C
Storage temperature/Humidity: -10–60˚C/5–95%
JAPAN: VCCI ClassB,TELEC (Wireless)
USA: FCC Part15 Subpart C (Wireless)
FCC Part15 Subpart C, Class B
Canada: IC RSS-210 (Wireless), IC ICES-003 ClassB
Europe: R&TTE, EMC, LVD
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wl-30Xg-705a

Table of Contents

Save PDF