Charging Battery - Panasonic DMC-FP3AB Basic Operating Instructions Manual

User manual
Table of Contents

Advertisement

Charging battery

About batteries that you can use with this unit
The•battery•that•can•be•used•with•this•unit•is•DMW-BCH7PP.
It has been found that counterfeit battery packs which look very
similar to the genuine product are made available to purchase in
some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised
that we are not liable for any accident or failure occurring as
a result of use of a counterfeit battery pack. To ensure that
safe products are used we would recommend that a genuine
Panasonic battery pack is used.
• Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can
be used safely. The dedicated battery (DMW-BCH7PP) supports
this function. The only batteries suitable for use with this unit
are genuine Panasonic products and batteries manufactured by
other companies and certified by Panasonic. (Batteries which do
not support this function cannot be used). Panasonic cannot in
any way guarantee the quality, performance or safety of batteries
which have been manufactured by other companies and are not
genuine Panasonic products.
• The battery is not charged when the camera is shipped. Charge
the battery and set the clock before use.
• Charge the battery with the charger indoors (10 °C - 35 °C)
(50 °F - 95 °F).
Insert the battery terminals and attach
the battery to the charger
Ensure•[LUMIX]•faces•outwards.
10•••
VQT2L41•(ENG)
Connect the charger to the electrical outlet
Charging light ([CHARGE])
On:• • • • C harging•in•progress•(approx.•110•
min.•if•fully•depleted)•
Off:• Charging•complete
Detach the battery after charging is completed
Guidelines for number of recordable pictures and
recording time
Number of recordable
pictures
Recording time
Playback time
Recording conditions by CIPA standard
• • CIPA•is•an•abbreviation•of•[Camera•&•Imaging•Products•Association].
• • [NORMAL•PICTURE]•Mode
• • Temperature:•23•°C•(73.4•°F)/Humidity:•50%•when•LCD•monitor•is•on. ∗
• • Using•a•Panasonic•SD•Memory•Card•(32•MB).
• • Using•the•supplied•battery.
• • Starting•recording•30•seconds•after•the•camera•is•turned•on.•(When•the•
optical•image•stabilizer•function•is•set•to•[AUTO].)
• • Recording•once•every•30•seconds•with•full•flash•every•second•
recording.
• • Rotating•the•zoom•lever•from•Tele•to•Wide•or•vice•versa•in•every•
recording.
1
• • Turning•the•camera•off•every•10•recordings•and•leaving•it•until•the•
temperature•of•the•battery•decreases.
2
∗ ••• T he•number•of•recordable•pictures•decreases•in•Auto•Power•LCD•
Mode•and•Power•LCD•Mode.
Approx.•300•pictures
Approx.•150•min
Approx.•260•min
•(ENG)•VQT2L41
•••11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-fp3kDmc-fp3rDmc-fp3sLumix dmc-fp3

Table of Contents