Using Video Edit - HP s510 User Manual

Using Video Edit

When a video clip is paused, press the Fn/Delete button to enter Video Edit mode. An Edit Panel displayed in
the lower left corner of the screen while the time bar and video length display in the bottom of the screen.
Star Point
End Point
Preview
Save
Return
Set Start/End point
1. Press Up/Down key on the navigation control to
select to set start point to trim the
beginning of the video;
the video to set end point.
3. Select the
the video clip.
The edited video clip will be saved as a separate file that can be performed video edit
again.
Edit Panel
to trim the end of
to preview or to save
Time Bar
2. Press Left/Right key on the navigation
control to move
interval. The video length must be at least
more than 2 seconds.
4. Select
Edit mode and return to the paused time
whether the Start/End point is set or not.
44
Video Length
on each 1/30 second
and press OK to exit Video