Setting The Af Area - HP s510 User Manual

Setting the Self-timer
Your camera features a Self-timer which can be set in the
Self-timer function in the Record Menu. The Self-timer allows
you to take photos after a pre-defined delay. While burst lets
you take consecutive shots. This function is only available in
recording photos. The Self-timer setting is automatically set to
off when you turn off the camera.
To set the Self-timer
1. From the Record menu, select Self-timer.
2. Use the 4-way navigation control to move through the
selections.
3. Press the OK button to save and apply changes.
The table below shows the available Self-timer settings.
Icon Item
Off
10 Sec.
2 Sec.
Double

Setting the AF Area

AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
To set AF Area
1. From the Record menu, select AF Area.
2. Use the 4-way navigation control to move through the
selections.
3. Press the OK button to save and apply changes.
The table below shows the available AF area settings.
Icon Item
Face Priority
Wide
Center
Tracking AF
Captures a photo without time delay.
Sets a 10-second delay to capture photo after pressing the Shutter button.
Sets a 2-second delay to capture photo after pressing the Shutter button.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the photo.
• Performs another 2-second delay then captures the photo again.
The camera automatically detects faces. Up to 10 faces can be detected at
the same time.
The camera automatically selects focus area within the wide frame.
The focus area is fixed on the center.
The camera will focus the subject as it moves and keep it continually in
focus automatically.
36
Description
Description