Controls; Sound Control; Tv, Scart, Video And S-Video Mode - Packard Bell DIGITAL TV 170 / 230 / 300 SW Owner's Manual

7. Select the Balance menu and adjust the balance of speakers.
8. Select the AVL (Automatic Volume Level) menu On or Off.
9. Select the Surround menu on or off.
10. Select the headphone Volume menu and adjust the volume from headphone.
The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the
factory and cannot be changed.
* Subwoofer is not available on 170 SW model.
A S C
UTO OUND ONTROL
SSM (S S M )
OUND TATUS EMORY
1. Press the SSM button
2. Press the SSM button repeatedly to select.
Each press of the button changes the screen display as below.
O
O
THER FUNCTIONS
THER FUNCTIONS
TV, SCART, VIDEO S-VIDEO
AND MODES
(You can't set PC mode in this menu. Use the TV/AV button)
External equipment inputs: VIDEO or S-VIDEO mode is used for
video devices like VCRs, DVDs, etc.), SCART mode is used for
SCART type devices.
Note:
If a VCR is connected to the antenna jack, use TV mode. See
External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the PR button to select Input.
4. Press the VOL button to select the video input (e.g. TV, SCART, S-VIDEO).
Alternatively select an input by pressing the TV/AV button repeatedly until the desired mode is
displayed.
15