Installation Procedure - Paradyne COMSPHERE 6700 Series User Manual

Installation and Setup
Software Prerequisites

Installation Procedure

"
2-2
You must have the following software installed before you install the Remote
Monitor feature on your 6700 NMS servers or clients:
H
COMSPHERE 6700 Series Network Management System
— NMS 5.0.2 or higher with Windows 95 or Windows NT
— NMS 4.0.9 or higher with MS-DOS Release 3.3 or higher
H
COMSPHERE 6700 Series NMS Multiuser Feature
H
COMSPHERE 6700 Series NMS Network Configuration Feature
H
Network interface:
— NDIS-compliant and NDIS driver, or
— Open Data-Link Interface (ODI) and ODI network adapter
(Ethernet, FDDI, token ring, etc.), or
— Additional serial port (PPP, SLIP, or CSLIP)
The Remote Monitor feature software must be installed on all 6700 NMS servers
and clients.
To install the Remote Monitor feature server or client software, start from the
Program Manager window.
NOTE:
NMS is designed to be the primary application program running on a
personal computer. If you use NMS with other applications, it is your
responsibility to ensure compatibility.
The following procedure refers to Drive A. Use the disk drive that is appropriate
for your PC.
Procedure
1. Insert Disk #1 into Drive A.
2. From the Program Manager window, if you are running:
— Windows 3.1, choose Run from the File menu.
— Windows 95 or Windows NT, choose the Start button and then Run.
3. In the Command Line field, type A:\INSTALL.
October 1998 6700-A2-GB23-10