9.
Click Close when the horizontal and vertical line settings
match the lengths of their respective lines. You return to
Command Center's main screen.
10.
Select Align Paper... from the Controller menu. The following
screen appears.
Fig. 7.6 Align Printer Margins
11.
Click Print Test. An alignment test page prints giving current
printer settings at the bottom.
12.
Measure where the x and y axes cross. They should cross 1" up
from the bottom and 1" over from the left side of the page. If
the lines cross at the correct place, skip to step 16.
13.
Use the x scroll bar to make x axis changes and the y scroll bar
to make y axis changes (fig. 7.6). For example, if the x axis is
low, move the x scroll bar to the right the desired number of
units.
____________________________________ Advanced Imaging 7-15