length, you need to adjust the printer's margin setting accordingly.
Both adjustments can be done using XANTÉ's Command Center.
In a Macintosh environment, to calibrate line lengths and adjust the
printer margins
1.
Start Command Center by double clicking its icon.
2.
Select X•ACT Calibration... from the General menu. The
following screen appears.
3.
Select the media size you are using in the Paper Size box (fig.
7.3).
4.
Click Update/Print. A page prints with a horizontal and a
vertical line on it.
____________________________________ Advanced Imaging 7-11
Fig. 7.3 X•ACT Screen