Roland R-4 Addendum

Added functions in the R-4
p.22
About BWF format
In system settings 5 System Setup (p.63), you can set Project File to BWF so
that the files created during recording and editing will be in BWF format. BWF
format contains information about the recording time and recording device
(EDIROL R-4) in addition to the data of a conventional WAV file.
Of course, BWF files can be loaded by playback devices or audio editing
software in the same way as conventional WAV files.
p.63
A menu item has been added to 5 System Setup.
Menu item
Battery Time
L-Connector
Project File
Copyright ©2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Value Function
Set this to the type of batteries you're using.
Choose the Alkaline setting if you're using
alkaline batteries, or Ni-MH if you're using
Alkaline, nickel metal-hydride batteries.
Ni-MH * If you choose a setting that does not match the
type of batteries that are actually installed, the
remaining battery power indication will not
be correct.
This setting Enables or Disables the function
Disable,
that lets the R-4 be controlled by a device
Enable
connected to the L-connector.
This specifies the type of project file that will be
created during recording or editing. If you
select WAV, a conventional WAV file will be
WAV, BWF created. If you select BWF, a BWF file
containing information about the recording
time and recording device (EDIROL R-4) will
be created.
40670567 1PD