Player Menus
Play
Play Mode
Parental Control
TV Image
Display
Front displa y
Sound
Black level
Languages
PAL/NTS C
TV Image
Depending on the format of the DVD disc, you can choose the picture format (aspect ratio) best
suited to the format of your TV screen:
4x3 Letterbox: gives best reproduction of pictures recorded in this format (i.e. with horizontal
bands at the top and bottom of the screen) or in 16x9.
4x3 Standard: reproduces a 4x3 picture without distortion.
16x9 Widescreen: reproduces 16x9 format films in full on a 16x9 screen.
Front Display
This option lets you choose how the front display of the DVD player appears. Four settings are
available:
Auto: the front display dims when a disc is playing.
Bright: the front display is always bright.
Dim: the front display is always dim.
Black level
This option lets you adjust the video brightness level.
Three settings are available: Normal, Dark and Light.
Progressive Scan
Progressive Scan provides high quality pictures with less flickering. Turn on Progressive Scan if you
used the Component Video jacks of the player to connect a TV or monitor compatible with a
progressive scan signal.
Press OK to activate Progressive Scan.
IMPORTANT! Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV
or monitor. If you activate Progressive Scan by mistake, follow the procedure below to reset the unit:
Press and hold the SUBWOOFER button on the remote control. The video output will be restored to the standard
setting and a picture will once again be visible on a conventional analog TV or monitor.
22
RDT170
Display settings
1. Select the Display option in the main menu using
4x3
standar d
the up/down arrow buttons and press OK.
Dim
2. Select an option using the left/right arrow buttons
Normal
and press OK.
PAL
4x3
22
1/31/05, 7:46 AM