Table of Contents
Advertisement
To attach the DVD player case to a seat back (fi gures 1 and 2)
1.
Unzip the main compartment that holds the player; locate the set of rings tucked inside the top edge of the
case (A).
2.
Locate the two straps with hooks on each end.
3.
Hook one end of each strap to the rings at the top of the case (A).
4.
Criss-cross the straps around the front of the headrest (B) and hook the straps to a second set of rings on the
lower part of the case (C).
5.
Tighten up the straps until secure.
To suspend the DVD player case between two bucket seats (fi gure 3):
1.
Unzip the main compartment that holds the player; locate the set of rings tucked inside the top edge of the
case (A).
2.
Locate the two straps with hooks on each end.
3.
Hook one end of each strap to the rings at the top of the case (A).
4.
Wrap each strap around the headrest of seat; hook the straps to a second set of rings on the lower part of the
case (C); in some vehicles, the middle rings in the gusset might work best (D).
5.
Tighten up the straps until secure.
Carrying Case
30
Advertisement
Table of Contents
