Planar PL1910MW User Manual page 10

Expansion Mode
Auto Adjustment
H. Position
V. Position
Clock
Phase
9300K
7500K
5000K
sRGB
User
Language
OSD
H. Position
OSD
V. Position
OSD
Turn Off
Volume
Input Select
Resolution Select 1360/1280/1024x768
1680/1400x1050
DDC/CI
Recall
FULL Selects wide format for display.
ASPECT Selects 4:3 format for display.
Auto adjusts the H/V Position, Phase and Clock of
picture. (available in analog mode only)
Adjusts the horizontal position.
(available in analog mode only)
Adjusts the vertical position.
(available in analog mode only)
Adjusts picture Clock.
(available in analog mode only)
Adjusts picture Focus.
(available in analog mode only)
Sets the color temperature to 9300K.
Sets the color temperature to 7500K.
Sets the color temperature to 5000K.
Sets the color temperature to sRGB.
R/G/B Allows users to adjust red/green/blue intensity.
Multi-language selection.
Adjusts the horizontal position of the OSD.
Adjusts the vertical position of the OSD.
Adjusts the OSD timeout.
Adjusts the volume of audio
D-SUB
Selects input signal to analog (D-Sub)
DVI
Selects input signal to digital (DVI)
720/640x400
Selects the resolution of choice.
ON/OFF Turns ON/OFF DDC/CI support
Clear each old status and return all adjusted
parameters to factory preset values.
9