Connecting The Camera And Computer; Starting Up Eu - Canon EOS 7D Instruction Manual

Connecting the Camera and Computer

To download to your computer images shot with your camera, you will
need to connect your camera and computer using the interface cable
provided with your camera.
1
Connect the large plug of the cable into the USB port
of your computer.
For the location and direction of the USB port, refer to the
computer User's Manual.
2 Connect the small plug of the cable into the <
terminal ( < A/V OUT / DIGITAL > terminal) on
7D
your camera.
Connect the plug with the <
camera.
Image downloading preparation is now complete. Continue with

"Starting up EU".

With 1Ds Mk III 1D Mk III , you can fix the plug to the camera with
the cable protector to prevent the plug from disconnecting. For
details on using, refer to p.57.
>
> mark facing the front of the
Starting up EU
When the camera's power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
Set the camera's power switch to < ON >.
EU Main window
EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with "Batch
Downloading Images to Your Computer".
The camera's LCD monitor turns on when EU starts up.
For cameras other than
and download images saved on the memory card inserted in the
camera to your computer. Refer to your camera's Instruction
Manual for details.
REBELT1i 500D cannot communicate with EU if the camera's
mode dial is set to < >. Set the mode dial to a mode other
than < >.
, you can operate the camera
7D
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
5