Canon EOS 7D Instruction Manual page 46

6
Specify settings.
Flash function settings window
[Wireless func.] button
5D Mk II
To enable the wireless function, click the button and select [Enable]
from the menu that appears. To cancel, select [Disable] from the
menu.
7D
To enable the wireless function, click the button and select the flash
combination from the menu that appears. To cancel, select [Disable]
from the menu.
Check that this box is
checkmarked
Click setting items, and
select settings from the
menu that appears
Enable the wireless func.,
click the setting items,
and then select settings
from the menu that
appears
When setting the flash functions directly on the camera or on the
flash, make sure to previously close EU [Flash function settings]
window. If the [Flash control] menu is displayed on the camera's
LCD monitor, EU [Flash function settings] window automatically
closes.
You can use modeling flash by clicking the [Modeling flash]
button. You should only use modeling flash for a maximum of 10
times continuously. (For more information, refer to the Instruction
Manual provided with the flash.)
You can name and save the flash setting as a file separate from
the image by clicking the [Save] button. You can also click the
[Open] button and load this file into EU for use in other shooting.
You can use flash shooting and Remote Live View shooting
together.
However, you cannot use modeling flash during Remote Live
View shooting.
Settings that can be performed in the [Flash function settings]
window differ depending on the flash and camera.
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
(p.24) Remote
Shooting
4
Preferences
Reference
Index
45 45